Nugent’s Appliance Repair Blog”

Whirlpool washer Error Code F9E1

When your Whirlpool washer shows F9E1, it means a long drain issue — water isn’t leaving the tub fast enough.

Causes: clogged pump filter, blocked hose, failed pump, or bad sensor.

DIY Fixes:

1. Check the drain hose.
2. Clean the pump filter (bottom panel).
3. Listen for the pump — silence may mean failure.

If the error continues, the pump or control board likely needs service.

👉 Nugent’s Appliance Repair offers fast Whirlpool repairs with a 1-year parts & labor warranty.

📞